• Easy 2 : 1 mixing ratio by volume (2 Parts Resin to 1 Part Hardener) 
• Heat Resistant up to 120ºc / 248ºF
• Demould 16 - 24 Hours (based on constant room temperature of 25ºc and pour depth of at least 15cm) Cure time of pours below 15cm approx 24 - 48 Hours. Cure times can vary based on pour depth and room temperature. Can be sanded after 3 - 5 days
• Very low viscosity
• Working time 60 - 90 minutes at 25ºc
• Can be poured up to 30cm 
• The most durable resin on the market so you can be confident your artwork will stand the test of time and resist scratches
• Features extreme clarity for a pristine, water clear finish 
• Advanced formulation to minimise bubbles when pouring (we recommend to also preheat part A (resin) in a warm water bath if your work area is cold
• ASTM Certified non-hazardous, non toxic and no VOCs 
• Suitable for river tables, flower / keepsake preservation, deep mould castings, woodturning and more
• Advanced UV resistance for non-yellowing and protection of your artwork.
• Self levelling
• Non flammable
• Odour Free
• Perfect for use with our glitters, pigments, epoxy pigment pastes and dyes.
• Suitable for use as a food safe coating but not as a cutting/food preparation surface.

• Refer to your instruction leaflet and mix carefully to ensure accurate results.
• Mix for at least 3 minutes, scraping the sides and the bottom of the container 
• By Volume A : B = 200 : 100  (200 parts Resin : 100 parts Hardener) (For example 200ml Resin : 100ml Hardener)
• By Weight  A : B = 300 : 100 (300 parts Resin : 100 parts Hardener) (For example 300g Resin : 100g Hardener)
• Work time - 60 - 90 minutes at 25°C
• Cure time - Demould 16 - 24 Hours (based on constant room temperature of 25ºc and pour depth of 15cm) Cure time of pours below 15cm approx 24 - 48 Hours. Cure times can vary based on pour depth and room temperature. Can be sanded after 3 - 5 days
• Viscosity - Low
• Heat Resistance - up to 120°C
• Extremely Durable
• Apex Resin Deep Cast is a deep pouring resin and is designed to be poured at a thickness between 10 - 30cm. It can be used for pouring at a thickness below 10cm, however we recommend the maximum mixing quantity to be no more than 9 Litres. This is based on a room temperature between 18 - 25°C. Temperatures above or below this may not produce the same results. For shallow castings we recommend our Apex Resin High Gloss.
• Coverage - 1 Litre covers approximately 2m2 
• Shelf life - 12 months in sealed containers

3 Litre Kit (2000ml Resin and 1000ml Hardener) with instruction leaflet

We offer this resin in kit sizes - 3 Litres, 6 Litres and 12 Litres so we can offer you a great discount for larger volumes. Please note you will receive your order in multiples of our 3 Litre Kit. For example if you purchase 12 Litres you receive 4 x 3L kits of Deep Cast. This ensures your order has a longer shelf life as bottles remain closed until needed, they are easier to handle and pour from and we can say thank you by saving you pennies for buying more!

Please note it is your responsibility to read all health and safety instructions before using this product. 

Our resins have been formulated with the most up to date epoxy resin chemicals and technology and with safety in mind. Apex Resin is safe for home use. (When used as directed)

As with all Resins, it is important that you read the safety precautions associated with our product carefully before use and contact us if you have any questions.

• Always wear nitrile gloves
• Wear a respirator when sanding partially cured resin 
• Work in a well ventilated room
• Although a respirator is essential when sanding partially cured resin, we also recommend the use of one whenever working with resin for complete protection, especially when additives such as inks, paints, pigments have been added to resin
• Wear safety goggles
• Avoid skin contact, if contact occurs-wash with soap and water
• Allow the resin to fully cure before handling
• Avoid contact with clothes and furniture. If resin is poured on unwanted areas wipe immediately with a clean, dry cloth using acetone or similar solvent 
• Do not eat, drink or smoke while working
• In case of eye contamination wash with plenty of water for more than 15 minutes and seek medical advice immediately.
• If swallowed, seek medical advice immediately
• If alcohol inks have been used, do not use a flame as alcohol is flammable. When alcohol inks are used in conjunction with other colourants, we advise the use of a respirator.
• Keep out of reach of children 
• Safe for incidental food contact only and not as a food preparation or cutting surface. Food should not exceed 50°C

Apex Resin Deep Cast Safety Data Sheet